Private Vehicle Sale, please get in touch via e-mail for viewings etc

General Features

  • Vehicle previously owned by Aircooled Engineering, was a former drag car 1967 model, great history
  • Was originally registered in Northern Ireland and retains this style reg and will be sold running red/black silver/ black plates
  • Original RHD
  • Full Custom 1 Off wiring hardness built from scratch inc wiring for Air Ride Dual Compressor setup, rev counted and alternator converted dynamo to name a few.
  • High Cranking amp Battery

Chassis Work

  • 18 Gauge Pan Halves (Wolfsburg West) Both Sides
  • Limebug Rear Air Ride System
  • Twin Dominator D2500l Bags
  • DT 225-355mm Gas Slammer Rear Shocks
  • Full RHD Pan Conversion, inc pedals, stops and rest plate
  • Dual Circuit RHD ATE Master Cylinder conversion
  • CNC Hydraulic Clutch Conversion
  • Modified napoleons hat for Hydro Clutch and Brake Master
  • Removable Boot Floor For Gearbox Access
  • Full Pan Sand Blast and complete Genuine Dynamat treatment, soundproofing and fire replant.
  • Detailed trailing arms, re-conditioned surfaces, new long travel ball joints and all new hardware x4
  • New detailed Limebug 4” Narrowed beam with TE Triple plated hardware, in beige matched coat to chassis
  • New 4” Narrowed Limebug Track Rods complete with Meyle OE Track Rod Ends
  • All New TRW Steering Box, painted in satin black with beige matched drag link to chassis with stop fork, also then matched to steering stop on beam.
  • COFAP OE Steering Damper Fitted in stock position.
  • All new genuine fuel tank including, inner grommet, brass elbow, micro filter and clearanced RHD model before being completely resprayed in gloss black.
  • T-Runner conversion in OE stamped seat tracks.
  • All Plug welded and punched pan halves for perfect fit.
  • Screwed and trimmed to fit body-chassis seal inc all pointed head zinc coated taper bolts to chassis
  • 4” Narrowed Super Strength Through rods in beam,
  • Jawbreaker shock towers fitted to achieve maximum drop
  • 2x Link Pin Gas/ Oil Shocks fitted for front Air Ride
  • Complete CB 2.5” Dropped Spindles for Disk Brakes
  • CB Disk Brake conversion kit to early 5x205 PCD with ball joint stub axles.
  • All New retaining (thrust washers), bearings, seals, grommets, LH and RH Pinch Nuts
  • 4X Allen Head 12.9BNM Rated Frame Head Bolts
  • Custom Made Single piece rear brake line braided flexy hoses for air ride range clearance.
  • 2” Custom Satin Black Air Plates with 4x matched urethane bushes pre-greased.
  • New, blasted and re-coated Torsion Bar housing covers including all new hardware
  • Super Flyer Gearbox including, all new seals gaskets syncros, + 3.88 R&P conversion upto super flyer spec with detailed side plates and red main housing to match interior.
  • All new clutch release fork, bearing arm and spring.
  • New Saco Hydro Slave Bracket and mount
  • Custom 90 degree hydro cable into chassis pipe.
  • New Frame Head M18 Frame Head Bolts
  • Fully Reconed Gearbox Hanger, including all new engine/ gearbox mounts
  • Nosecone Gearbox Mount
  • New Gearbox Earth Strap
  • All New Brake Hardline Set
  • All Brake Hardline Chassis bungs replaced
  • Painted and re-greased shift fork
  • Genuine Gene Berg Shifter RHD with Limited edition Silver Handle
  • 4x New brake line speed clips
  • New Rear Drums 5x205pcd
  • Rear wheel spacer conversion kit for long axle
  • All new read shoes, fitting kit and wheel cylinders
  • New Handbrake lever
  • New Brake/ Clutch Rubber Pedal Pads
  • New Accelerator Pedal Pads
  • New Handbrake cables both sides,
  • New handbrake retaining backing plate clips
  • New Rear Packing Plates
  • New Handbrake Spacer Bars
  • New Castle Nuts both rear axles inc split pins
  • Titanium Forged Lug nuts from FourtyFour Wheel Company
  • Stud Conversion for rear drums
  • Direct Mount Resevoir Fitted
  • New Chassis Mount Rubber Blocks
  • New Beam Mount Rubber Blocks and Capping Washers
  • All black routed air line
  • Fully beige detailed rear air ride cradle
  • Clearanced bump stops
  • New Bosch Genuine Starter Motor
  • New 100amp Sheathed Cabling
  • New Battery mount clamp, colour coded.
  • Fully colour coded chassis in beige.
  • Full cunnifer fuel line conversion
  • Custom TE Frame head cover, double layer, matched stainless hardware and foam seal.
  • Custom Limebug front brake line tabs


Engine Work

  • 2027cc re-worked original AS41 motor
  • CB Oval CNC Match ported and flowed big valve heads
  • Scat 1.4(I think) ratio rockers forged
  • Scat cut to length Chromo Pushrod Tubes
  • CB Port matched big beef manifolds.
  • Genuine 44 IDF Dual Weber Carbs
  • CSP Hex Bar Linkage
  • Genuine Scat Blanked Fanshroud
  • Original Mallory Points Distributor
  • Mallory Matched Coil
  • Custom length Pertronix HT Leads
  • 8 Forged Stroker Crank for Scat
  • Performance I-Beam Con Rods
  • FK8 Grind Camshaft from Scat
  • Scat lightweight lifters
  • Medium weight 200mm performance flywheels
  • 200mm woven clutch brand new
  • Stage 1 Kennedy performance pressure plate
  • Scat Full tinware kit all powdercoated Satin Black
  • Bosch 55amp alternator
  • MST ‘Limebug’ Signature Billet Pulley, Rocker Covers, Alt Stand
  • CB Distributor Clamp
  • Scat Fuel Pump, Regulator, High pressure fuel filter
  • CSP Pyhton Exhaust system, then dismantled and fully hand polished.
  • Full flowed case
  • Big flow 30mm gear mechanical oil pump plugged
  • CB Face Plate
  • Modified Pulley Tin for full flow
  • External Oil Fiter head mount, pipework and barbs
  • Extra Guard PH8A Spin on Oil Filter
  • MST Black billet OE style sump plate with Mag sump plug
  • Clearanced original case by hand for con rod clearance
  • Line bore to 0.5, 1mm First life case
  • All new Elring gasket set used for rebuild
  • All Mahle Forged Piston Barrel Set
  • Limebug Accelerator Roller Throttle Tube
  • All new Fan, Hardware fitting kit, and hub
  • Stainless Alternator/ Crank Bolt


Exterior

  • All glass is brand new, OE quality, rear screen has deleted heater element, all clear glass, only original is quarter lights and sliding door glass.
  • All quarter lights, total strip then full glass polish, frame polish, repair cracks, re-fit/ seal. New genuine style rivets (knock heads) re-fitted. Detailed slider and all felt channels replaced. New grip channels in all felts.
  • All new hardware for quarter light fixings.
  • Sourced latch for 1x damaged qtr light latch
  • New Window winder mech for 67 both sides new. (Still a little stiff, needs grease working in)
  • OE grade door seals, full replaced and fettled to fit
  • All metal trim best quality available, fitted with OE grade finishers, fitted using correct tools, no marks or chips.
  • Limebug custom front license plate mounting brackets
  • Stainless Steel front and Rear Blasé Bumpers with Stainless Overriders
  • Powdercoated new Satin Black Bumper Irons
  • New Bumper Iron Grommets and Mounting Hardware
  • New Stainless Loche Horn Grills
  • New 12 Volt horn, detailed Black
  • Stainless Wide Early trim on early running boards
  • OE Rubber and steel running boards, all new mounting hardware with Zinc plated clips
  • Custom powder coated combination US spec lens with directional RHD lens. Each lamp totally stripped, blasted, polished and re-coated. All new hardware and bulbs/ holders. Plus Stainless 20 past 8 Sloping Lens


Body Work

  • Both Heater Channels Replaced, then original vent angles matched to look as OEM
  • Both Door Pillars replaced
  • All four wings
  • Bonnet Several Localised Repairs
  • Dashboard total repair
  • New sourced bonnet
  • All four new wings
  • Rear Tailamps with correct UK spec amber lens, feature, all new chrome, lens, housing and seals.
  • Rear QTR panels both sides
  • Hookys Hi-Pac inspection panels boths sides
  • New rear valance
  • New 66 engine lid
  • New engine latch, catch
  • New rear inner wing both sides
  • New boot floor
  • New body support member both sides,
  • Total re-work of nosecone due to bad fit by previous owner
  • Blanked hole for steering box access for LHD
  • New naps hat fitted
  • Door Skin Drivers side, re-work
  • Fully blasted chassis, etch primed base, total nut/ bolt strip
  • Paint colour is Reed Green which is an early 50’s colour, it would not be on a model of this age originally however it is a genuine VW colour. The vehicles original colour is either Savanah or Texas Beige


Interior

  • Best quality Newton Commercial Premium carpet set, cut to fit, with rubber air holes, and kick patches in place, all finished edges, twin needled in matched hem.
  • Interior is all sourced 65 interior blasted and painted original grey, all handles replaced with NOS parts. Swaddling replaced with OE grade new, interior re-trimmed in deep burnt red vinyl. Perforation carried out at Bentley Motors for main back and centre rear seats.
  • All Chocolate box stitch front and rear finish across the whole interior inc door cards and kick panels
  • Headliner all new over genuine Dynamat Dynaliner in premium TMI full deluxe perforated cream vinyl
  • Fully detailed deluxe RHD OE rearview mirror
  • New TMI cream sunvisors
  • Retaining clips for above and all new hardware
  • New genuine bosch courtesy light
  • All plastic door caps fitted, included new stainless hinge bolts
  • New striker plates and torx head nuts new on all
  • New Door Check Straps, Pin, Down, lock and rubber seal grommets
  • New Interior light trigger switches both sides
  • New Fastfab 3 Dial Radio Blanking plate cover, detailing in Reed green
  • Cream painted steering column
  • Overhauled original 67 indicator stalk unit
  • Genuine Flat 4 GTV Rose Woodrim Steering Wheel and Matched Door Pins
  • Genuine Flat 4 Steering Wheel Boss
  • All new lock ring, nut, horn push, and sprung washer to column
  • New Steering column mount and rubber column bush.


Wheels

  • Titanio Venus Wheels. Best quality restoration on record 1950’s super rare wheel
  • Best original Mexican examples in 15x6 all round,
  • New Radial front and rear tyres
  • Wheels include custom lug serts made to convert to radioused seats.
  • Reserve the right to keep these wheels and will alternatively be sold on colour matched smoothies in staggered offsets





More info...