Hi

Wonder if any one can help me with a fault code checked on the site but
can not find any information.
The car is an Audi A3 2.0 TDI on a 2011 in the year

The customers fault is the management light is on but the vehicle drives
and runs fine with no faults showing on the car.

I can clear the code with my VCDS but it comes back on when i turn the
ignition on with out starting the vehicle

Fault code is 17262 - Terminal 30

U140A 00 [032] - Open Circuit
Address 01: Engine (J623-CFF Labels: 03L-906-018-CFF.clb

Part No SW: 03L 906 018 AB HW: 03L 906 018 AG
Component: R4 2,0L EDC H26 9041
Revision: 41H26--- Serial number: AUX7Z0K9FNH08C
Coding: 00190012040501080000
Shop #: WSC 06314 000 00000
ASAM Dataset: EV_ECM20TDI01103L906018AB 003008
ROD: EV_ECM20TDI01103L906018AB.rod
VCID: 6ADC48E48D77BF71D0B-803F


1 Fault Found:
8169 - Terminal 30
U140A 00 [039] - Open Circuit
Not Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Mileage: 121932 km
Date: 2000.00.00
Time: 00:00:00

Readiness: 0 0 0 0 1